Skip to main content Skip to secondary navigation
Main content start

Sangkyun Kang

Stanford University, Ph. D. in Mechanical Engineering, November 2001
Stanford University, Master of Science in Mechanical Engineering 1997
Seoul National University, BS in Naval Architecture and Ocean Engineering, 1996

Academic Interests

  • Novel manufacturing technology development
  • Micro-scale power devices
  • Nano-pore metal membrane development


Joon Hyung Shim,* Sangkyun Kang, Suk-Won Cha, Wonyoung Lee, Young Beom Kim, Joong Sun Park, Turgut M. Gur, Fritz B. Prinz,* Cheng-Chieh Chao, Jihwan An, "Atomic layer deposition of thin-film ceramic electrolytes for high-performance fuel cells ", J. MATER. CHEM. A (feature article), 2013.

Y. B. Kim, T. M. Gür, H.-J. Jung, S. Kang, R. Sinclair, F. B. Prinz, "Effect of crystallinity on proton conductivity in yttrium-doped barium zirconate thin films", SOLID STATE IONICS, vol. 198, pp. 39-46, 2011.

Y. B. Kim*, T. M. Gür, S. Kang, H.-J. Jung, R. Sinclair, F. B. Prinz, "Crater patterned 3-D proton conducting ceramic fuel cell architecture with ultra thin Y:BaZrO3 electrolyte", ELECTROCHEMISTRY COMMUNICATIONS, vol. 13, pp. 403-406, 2011.

J. S. Park, S. K. Kang, T. M. Gür and F. B. Prinz, "Atomic Layer Deposited Yttria Stabilized Zirconia Barrier Layer for Proton Conducting Oxide (Invited) ", ECS TRANS, vol. 41, pp. 315-319, 2011.

J Komadina, YB Kim, JS Park, T Gür, SK Kang, FB Prinz, "Low Temperature Direct Methanol Fuel Cell With YSZ Electrolyte", ECS TRANS, vol. 35, 2011.

J. S. Park, Y. B. Kim, J. H. Shim, S. Kang, T. M. Gür and F. B. Prinz, "Evidence of Proton Transport in Atomic Layer Deposited Yttria-Stabilized Zirconia Films ", CHEM. MATER., vol. 22, pp. 5366-5370, 2010.

  J. H. Shim, J. S. Park, J. An, T. M. Gür, S. Kang, F. B. Prinz, "Intermediate-Temperature Ceramic Fuel Cells with Thin Film Yttrium-Doped Barium Zirconate Electrolytes ", CHEM. MATER., vol. 21, pp. 3290-3296, 2009.

S. Kang, P. C. Su, Y. I. Park, Y. Saito, and F. B. Prinz, "Thin-Film Solid Oxide Fuel Cells on Porous Nickel Substrates with Multistage Nanohole Array ", JOURNAL OF THE ELECTROCHEMICAL SOCIETY, vol. 153, 2006.

Hao-Chih Liu, Sunyoup Lee, Sangkyun Kang, Christopher F Edwards, Fritz B Prinz, "RP of Si3N4 burner arrays via assembly mould SDM”, RAPID PROTOTYPING JOURNAL, vol. 10, iss. 4, pp. 239-246(8), Emerald Group Publishing Limited, 1 April 2004

Sangkyun Kang, James P. Johnston, Toshiyuki Arima, Minoru Matsunaga, Hideaki Tsuru, Fritz B. Prinz, “Micro-Scale Radial-Flow Compressor Impeller Made of Silicon Nitride: Manufacturing and Performance”, PROCEEDINGS OF ASME TURBO EXPO 2003, Power for Land, Sea, and Air, June 16-19, Atlanta, Georgia, USA, 2003.

T. Fabian, S. Kang, F.B. Prinz, "Capacitive blade tip clearance measurements for a micro gas turbine”, INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE, 2002. IMTC/2002. Proceedings of the 19th IEEE, Volume 2, 21-23 Page(s):1011 - 1015 vol.2, 2002. 

H.-C. Liu, J. Stampfl, S. Kang, F. B. Prinz, “Fabrication of ceramic components for micro gas turbine engines”, CERAMIC ENGINEERING & SCIENCE PROCEEDINGS, Vol.23, (4), PP43-48, 2002.

J. Stampfl, H. Ch. Liu, S. W. Nam, K. Sakamoto, H. Tsuru, S. Kang, A. G. Cooper, A. Nickel, F. B. Prinz, “Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries”, MATERIALS SCIENCE AND ENGINEERING A334 187-192, 2002.

S. Kang, J.Stampfl, A.G. Cooper and F. Prinz, "Application of the Mold SDM process to the fabrication of ceramic parts for a micro gas turbine engine”, In: J.G. Heinrich (ed.), PROCEEDINGS CERAMIC MATERIALS AND COMPONENTS FOR ENGINES, in print, Germany, June 2000.

A.G.Cooper, S. Kang, J.Stampfl, F.B. Prinz, "Fabrication of ceramic parts for a miniature jet engine application using Mold SDM”, INNOVATIVE PROCESSING AND SYNTHESIS OF CERAMICS, GLASSES AND COMPOSITES III, J.P. Singh, N.P. Bansal and K. Nihara (eds.), Ceramic Transactions, Vol. 108, pp389-398, 2000.

J. Stampfl, H.-C. Liu, S. W. Nam, S. Kang and F. B. Prinz, "Rapid prototyping of mesoscopic devices”, In: B.Michel (ed.), PROCEEDINGS MICROMATERIALS 2000, in print, Berlin, April 2000.

S.W. Nam, H.-C. Liu, J. Stampfl, S. Kang and F.B. Prinz, "mMold Shape Deposition Manufacturing of Ceramic Parts”, PROCEEDINGS MRS SPRING MEETING, in print, San Francisco, April 2000.

S. Kang, A. G. Cooper, J. Stampfl, F. Prinz, J. Lombardi, L. Weiss, J.Sherbeck, "Fabrication of high quality ceramic parts using Mold SDM”, PROC. SOLID FREEFORM FABRICATION SYMPOSIUM, pp 427-434, University of Texas at Austin, Austin, Texas, August 1999.

A.G. Cooper, S. Kang, J.W. Kietzman, F.B. Prinz, J.L. Lombardi and L.E. Weiss, "Automated fabrication of complex molded parts using Mold Shape Deposition Manufacturing”, MATERIALS AND DESIGN, Vol. 20, No. 2/3, 83-89, June 1999.

A. G. Cooper, S. Kang, J. W. Kietzman, F. B. Prinz, J. L. Lombardi and L. Weiss, "Automated Fabrication of Complex Molded Parts Using Mold SDM”, PROCEEDINGS OF THE SOLID FREEFORM FABRICATION SYMPOSIUM, pp 721-788, University of Texas at Austin, Austin, Texas, August 1998.